CSU-Carig
Barba, Louie Tangonan
Real time fire response system / - 2020. - x, 30 pages ; 23 cm.
APPROVAL PAGE
BIOGRAPHICAL SKETCH
ACKNOWLEDGEMENT
TABLE OF CONTENTS
LIST OF TABLES
LIST OF FIGURES
LIST OF APPENDICES
LIST OF APPENDIX FIGURES
ABSTRACT
I. INTRODUCTION
1.1 Background of the Study
1.2 Conceptual Framework
1.3 Objectives of the Study
1.4 Statement of the Problem
1.5 Significance of the Study
1.6 Scope and Delimitation
1.7 Definition of Terms
II. REVIEW OF RELATED LITERATURE
2.1 Fire
2.2 Fire Detection and Alarm System
2.3 Fire Response System Global system for Mobile communication
2.5 Radio Frequency Transmitter - Receiver
III. METHODOLOGY
3.1 Implementation Procedures
3.2 Hardware Development
3.3 Flow Chart
3.4 Software Development
IV. RESULTS AND DISCUSSION
4.1 Analysis and Testing
a. Sending Messages and Relaying Timely Notifications
b. Time- Response
V. SUMMARY, CONCLUSION AND RECOMMENDATIONS
5.1 Summary
5.2 Conclusion
5.3 Recommendations
REFERENCES
APPENDICES
The purpose of this project is to develop a real-time fire response system within Regional Center Carig Sur with 5-km radius to alert the home owner and Bureau of Fire Protection against fire incidents. The system communicates using the GSM Technology and 433 MHz LoRa Transmitter- Receiver. The function of GSM module in the house is to send notification to the owner and to the fire station, but before it sends and alert to the fire station, it will receive a confirmation message from the owner. While the function of the GSM module in the Fire Station is to Receive Alert Codes from different houses. Each code sent by the GSM module corresponds to the house location in the LED mapping. The LoRa Transmitter and Receiver uses Radio Frequency to communicate and send information. In this system, the researchers used a multiple transmitter and a single receiver. While the researchers used codes in GSM module, to have addressing more efficient, in here the researchers used a multiplexer and demultiplexer, in order to have a unique address for every house, and reduce conflict and errors in the receiving end.
Keywords : Real-time, GSM, 433 MHz LoRa, Smoke Sensors
ELECTRO 0006 / 2020 c.1
Real time fire response system / - 2020. - x, 30 pages ; 23 cm.
APPROVAL PAGE
BIOGRAPHICAL SKETCH
ACKNOWLEDGEMENT
TABLE OF CONTENTS
LIST OF TABLES
LIST OF FIGURES
LIST OF APPENDICES
LIST OF APPENDIX FIGURES
ABSTRACT
I. INTRODUCTION
1.1 Background of the Study
1.2 Conceptual Framework
1.3 Objectives of the Study
1.4 Statement of the Problem
1.5 Significance of the Study
1.6 Scope and Delimitation
1.7 Definition of Terms
II. REVIEW OF RELATED LITERATURE
2.1 Fire
2.2 Fire Detection and Alarm System
2.3 Fire Response System Global system for Mobile communication
2.5 Radio Frequency Transmitter - Receiver
III. METHODOLOGY
3.1 Implementation Procedures
3.2 Hardware Development
3.3 Flow Chart
3.4 Software Development
IV. RESULTS AND DISCUSSION
4.1 Analysis and Testing
a. Sending Messages and Relaying Timely Notifications
b. Time- Response
V. SUMMARY, CONCLUSION AND RECOMMENDATIONS
5.1 Summary
5.2 Conclusion
5.3 Recommendations
REFERENCES
APPENDICES
The purpose of this project is to develop a real-time fire response system within Regional Center Carig Sur with 5-km radius to alert the home owner and Bureau of Fire Protection against fire incidents. The system communicates using the GSM Technology and 433 MHz LoRa Transmitter- Receiver. The function of GSM module in the house is to send notification to the owner and to the fire station, but before it sends and alert to the fire station, it will receive a confirmation message from the owner. While the function of the GSM module in the Fire Station is to Receive Alert Codes from different houses. Each code sent by the GSM module corresponds to the house location in the LED mapping. The LoRa Transmitter and Receiver uses Radio Frequency to communicate and send information. In this system, the researchers used a multiple transmitter and a single receiver. While the researchers used codes in GSM module, to have addressing more efficient, in here the researchers used a multiplexer and demultiplexer, in order to have a unique address for every house, and reduce conflict and errors in the receiving end.
Keywords : Real-time, GSM, 433 MHz LoRa, Smoke Sensors
ELECTRO 0006 / 2020 c.1